HYDROPNEUMATIC EQUIPMENT OFFSHORE MARINE

Stainless Accumulators Stainless Volume Indication Accumulators Best Multipurpose Stainless Accumulators Heave motion compensators Hydro-pneumatic exploration and production APPLICATIONS Pipe shock , "water hammer" & surge. Pulsation Dampers

 

 

Sitemap

Quality Assurance And ControlHydroTrole Limited News and Information

X-ray Spectography of Metals "PMI"
Positive material identification by X-Ray fluorescence.

Identifying Metal with Eddy Current Using the ED250
Identifying Metal with Eddy Current Using the ED250.

Instructions for Hardness Testing Steel
This inspection is for the hardness testing (H.T.) within the parameters of the ROCKWELL "C" SCALE.

Instructions for Ultrasonic Thickness Testing: Thin, Flat or Round Surfaces
This Work Instruction is with the ultrasonic thickness tester "TM1D" which is only accurate in a thickness range from about .5 mm to 8 mm due to the frequency and size of the transducer, and is accurate on a curved surface down to around 3.5 mm Rad.

Instructions for Calibration of Inspection and Test Equipment
Hydro-pressure, gas pressure gauges, torque wrenches, dial indicators, and micrometers.

Inspection and Testing
This procedure describes the stages at which inspections and tests of the product are carried out to ensure its conformance to the application purpose specification.

Crack Detection by Eddy Current
Instructions for eddy current inspection of ShockGuards.

Pre P.E.D. and EN 13445 Safety Design and Use Code
Hydro-pneumatic Accumulator / Damper Safety Design and Use Code